by Mick Pittman | Jan 3, 2014 | Promo - Suspension, Promotions & Discounts
Share The BR series coilovers is our personal suspension of choice for use on track. They employ a large 46mm diameter piston in a 53mm diameter monotube damper body but we also offer some optional extras for those that want to vary their setup for different circuits:- Damper adjusting extenders Assister spring perch Uprated springs (Front & Rear) Optional Upgrades Damper adjusting extenders – to save you the time and trouble of removing the parcel shelf each time you want to adjust the damping on your BC Racing coilovers we can offer pairs of adjuster extenders. These attach to the adjuster knob on the top of the coilover and are available in three lengths, 110mm, 200mm and 250mm. They attach in seconds with a simple grub screw design. Assister spring perch – you might prefer to run some droop with your coilovers or maybe you want to alter the ride by adding an additional smaller assister spring. The spring perch and assister springs allows you to do this. The springs are available in a wide range of spring...
by Mick Pittman | Jan 3, 2014 | Promo - Suspension, Promotions & Discounts
Share The BR series coilovers use a large 46mm diameter piston in a 53mm diameter damper body to maximise oil capacity. As the damper unit operates the oil contained within heats up. The viscosity of oil changes as its temperature varies which can lead to changes in the damping characteristic of the unit. BC Racing only use a very high quality oil with their coilovers but go that extra mile to maximise performance and build their BR range with a large 53mm diameter damper body. This increases the capacity of the unit which increases the volume of oil contained which in turn reduces the peak temperature and so significantly improves damper performance. Features & Specifications 53mm Nitrogen/Oil filled Monotube dampers Pillowball upper mount (*) Camber adjustable top mounts Aluminium top plates 30 way adjustable damping Adjustable spring platform Height adjustment via bottom mount to retain full damper travel Bearing mounted upper front spring platform Dust boot to protect damper seals Available for Clio II RS (Inc. 182 Cup), Twingo II RS & Megane II RS models (*) – Please note that some features are dependent on model, not available for RS172/182 Corner weight adjustment The lower spring platform of the BC Racing coilovers are adjustable. This allows the car to be set up for corner weighting to achieve perfect balance and ensures that maximum tyre efficiency is achieved. The car needs to be placing equal weight on each tyre on an axle so both front tyres need to be taking equal loading as do both rears. This makes sure that both tyres are doing their equal share of work...
